A few days ago, a company in Guanlan, Shenzhen, introduced a set of touch LCD splicing screen to huabangying, a LCD splicing screen manufacturer, as the display equipment of the company's exhibition hall to display the company's planning, current development, product sample drawings and future goals.
Customers, franchisees and partners who come to visit the company have placed high hopes on the company. Touching the LCD splicing screen can show the soft power of the enterprise itself. Combining with the current development momentum and following the trend, visitors can feel the feeling of youth, vitality, vitality, keeping pace with the times and innovation.
Project specifications:
Splicing unit: HBY-PJ550P
Splicing seam: 3.5mm
Splicing specifications: 2*3/55 inch
Contrast ratio: 4500:1
Resolution: 1920*1080
Response time: less than 6ms, J extremely fast response, refuse to procrastinate
Operating life: more than 70,000h, supporting various long time
Installation method: Floor stand installation, which is conducive to maintenance, simple and stylish.
Brightness: 500cd/m2
Contractor: LCD splicing screen manufacturer Winbond Ying Technology, CCTV Discovery Brand, High-tech Enterprise, Famous Chinese Brand.
Panel type: Samsung industrial grade S-PVA panel
Huabangying LCD splicing screen adopts the industry-leading direct down backlight, with bright color, clear and delicate picture, bright saturation; it has the characteristics of energy saving, environmental protection, no radiation and long service life. Support 7 * 24-hour uninterrupted work, adapt to a variety of long-time boot working environment.
Installation environment introduction:
1. The splicer is used to process the access to meet the needs of the display system, single-screen, multi-screen display, and timed carousel; support multiple signal access.
2. The power supply system at the installation site is operating normally, close to three-phase balance, and the load power of each wiring is basically the same, and the grounding is good, less than 4 ohms, which can ensure the loop safety.
3. The construction site environment is clean and dust-free; the floor where the projection unit is installed is flat and firm; the splicing cabinet can load. In the field wiring, use a wire slot to separate the strong and weak wires to prevent signal interference; there is no direct strong light near the screen, so as not to affect the display of the splicing screen and cause reflection.
4. The height of the splicing wall is H=2.92m, and the length L=4.16m. According to the request of the other party, the splicing screen is centered, with a spacing of about 120cm below and about 20cm above the spacing. The budget and various factors are considered. 2*3, 55 inches, a total of 6 splicing large screen solutions. (55 inches H≈68.4cm, L≈121.3cm)
Now that the project has been installed and tested, it has been put into use smoothly. It is the unremitting pursuit of huabangying, a LCD splicing screen manufacturer, to strive to create personalized display scheme for customers. Hua Bangying will continue to make great achievements in the future.